When the hydraulic lifting platform is used, what needs to be done is to carry out the relevant platform maintenance. How to carry out the specific maintenance? Now let's follow Xiao Bian's steps to solve it.

液压升降平台怎么进行维护呢？

How to maintain the hydraulic lifting platform?

一：更加润滑

1： More lubrication

大多数人以为增加更多润滑剂不会对设备造成伤害。不是这种情况。液压式升降平台的机械操作部件的结构和运用决定了燃料量。一般，设备的运用说明书中有清晰的规则和要求。应根据设备说明书，燃油表或燃油表，窗户等补充。增加过多润滑剂对机械设备不利。

Most people think that adding more lubricant will not harm the equipment. This is not the case. The structure and application of the mechanical operating parts of the hydraulic lifting platform determine the fuel quantity. Generally, there are clear rules and requirements in the equipment operation instructions. It shall be supplemented according to the equipment specification, fuel gauge or fuel gauge, windows, etc. Adding too much lubricant is bad for mechanical equipment.

二：加入润滑油后，快速

2： After adding lubricating oil, quickly

严格来说：这是概念了解中的过错，只有燃料可以直接参与作业。

Strictly speaking, this is the fault in concept understanding, and only fuel can directly participate in the operation.

液压式升降平台润滑油首要用于向彼此移动的冲突副增加润滑油以填充不平坦部分，并坚持相应厚度的润滑油膜，这可以使冲突副的外表彼此别离。

The lubricating oil of the hydraulic lifting platform is mainly used to add lubricating oil to the conflicting pairs moving with each other to fill the uneven part, and adhere to the lubricating oil film of corresponding thickness, which can make the appearance of the conflicting pairs separate from each other.

削减冲突，削减磨损，并答应冷却和密封。

Reduce conflict, reduce wear, and allow cooling and sealing.

三、替换密封圈时

3、 When replacing the seal ring

替换密封圈时，首要需求打开液压式升降平台的液压体系，严厉清洁，避免杂质和脏油进入体系。

When replacing the seal ring, it is necessary to open the hydraulic system of the hydraulic lifting platform and clean it strictly to avoid impurities and dirty oil entering the system.

安装时，您需求运用特别东西来避免锋利的边缘和指甲被划伤，直接从部件的螺纹部分移除密封环更加困难。

During installation, you need to use special things to prevent sharp edges and nails from being scratched. It is more difficult to remove the seal ring directly from the threaded part of the component.

在特别情况下，有必要制作一个简单的安装东西或运用塑料薄膜包裹螺纹方位。密封圈类型好，可直接运用。

In special cases, it is necessary to make a simple installation or wrap the thread orientation with plastic film. The seal ring is of good type and can be used directly.