Mobile boarding bridge is no stranger to logistics and warehousing companies. It loads and unloads goods together with the forklift truck, which can greatly improve the work efficiency, reduce the work difficulty, and effectively ensure the safety of goods. Of course, the premise to achieve this effect is that the company can correctly operate the mobile boarding bridge. Unfortunately, many companies often abuse the mobile boarding bridge when using it, which will cause unnecessary damage to the boarding bridge and shorten the service life of the mobile boarding bridge.

据国内着名的移动登车桥制造商苏州宇泽起重机械技术有限公司总工程师小编先生介绍，在使用移动登车桥之前，应检查设备卸荷阀是否拧紧，确认卸荷阀拧紧在关闭的前提下，即可开始操作。同时，应对操作员进行培训，以充分了解和理解移动登车桥的使用和维护，这不仅有助于设备的熟练操作，而且有助于发现设备异常情况和故障。

According to Mr. Xiao Bian, the chief engineer of Suzhou Yuze Crane Machinery Technology Co., Ltd., a famous manufacturer of mobile boarding bridge in China, before using the mobile boarding bridge, first check whether the unloading valve of the equipment is tightened, and confirm that the operation can be started after the unloading valve is tightened and closed. At the same time, professional training shall be provided for operators to fully understand and understand the use and maintenance of mobile boarding bridge, which is not only helpful for skilled operation of equipment, but also helpful for finding abnormal conditions and faults of equipment.

他说，总体而言，移动登车桥的操作分为以下步骤：

He said that, in general, the operation of the mobile boarding bridge is divided into the following steps:

1.使用液压杆将活动的登机桥摇所需的位置高度，该高度通常应高于卡车行李箱板。

1. Use the hydraulic lever to swing the movable boarding bridge to the required height, which should be generally higher than the trunk plate of the truck.

2.将卡车倒转登机桥的舌板区域，打开手动泵阀，让登机桥的舌板缓慢下落，将其压在卡车货箱的底部，然后将手册锁定泵阀。

2. Reverse the truck to the tongue area of the boarding bridge, open the manual pump valve, let the tongue of the boarding bridge fall slowly, press it on the bottom of the truck cargo box, and then lock the pump valve with the manual.

3.放下活动登机桥支撑，以确保将登机桥稳定地支撑在地面上。

3. Lower the movable boarding bridge support to ensure that the boarding bridge is stably supported on the ground.

4.使用板唇两侧的挂钩将活动登机桥固定在卡车的侧面，以防止登机桥与卡车分离。

4. Use hooks on both sides of the plate lip to fix the movable boarding bridge on the side of the truck to prevent the boarding bridge from separating from the truck.

5.将登机桥两侧的制动块移轮胎的后部，以防止轮胎滑落。

5. Move the brake pads on both sides of the boarding bridge to the rear of the tire to prevent the tire from slipping.

6.放低活动登机桥两侧的后挡板，使登机桥呈斜坡状，将地面与卡车连接起来

6. Lower the tailgate on both sides of the movable boarding bridge to make the boarding bridge slope and connect the ground with the truck

7.当确认设备完全固定，支撑框架稳定且制动块已有效放置时，即可开始使用活动登机桥。

7. When it is confirmed that the equipment is completely fixed, the support frame is stable and the brake block has been effectively placed, the movable boarding bridge can be used.

小编提醒企业，在移动登车桥舌和货车连接后，将手动阀锁紧，并用舌板两侧的钩子将登机桥和货车固定，这样可以有效避免分离移动登车桥和卡车。造成不必要的人身伤害和财产损失。

The small group reminded the enterprise that after the mobile boarding bridge tongue is connected with the truck, the manual valve is locked and the boarding bridge and truck are fixed with hooks on both sides of the tongue plate, which can effectively avoid separating the mobile boarding bridge and truck. Cause unnecessary personal injury and property loss.

此外，他还提醒大家，在使用移动登车桥时，要注意使设备保持在不发生油缸挣扎的状态，并且不要让移动式顶升油缸在高负荷下工作。长时间延长设备使用寿命。

In addition, he also reminded everyone that when using the mobile boarding bridge, attention should be paid to keeping the equipment free of cylinder struggle, and do not let the mobile jacking cylinder work under high load. Prolong the service life of the equipment.