In the current storage equipment, the fixed hydraulic boarding bridge has always played a very important role, providing great convenience for people to load and unload goods. Then, it needs to be installed on the cargo platform of the fixed operation site, which is one more installation process than the mobile hydraulic boarding bridge. How large is the installation pit reserved for the fixed hydraulic boarding bridge?

固定式液压登车桥安装坑位要预留多大？

How large is the installation pit reserved for fixed hydraulic boarding axle?

由于固定式液压登车桥有需要定做和不需要定做两种形式，很多固定场合都是不需要定制的，常规款登车桥的尺寸是：2440*1830mm，需要预留的坑位是2600*1860*510mm，只要按照厂家这种标准型尺寸预留就可以了，然而，有的作业场合、环境不同，需要重新根据现场要求进行定制才行，这个时候就需要厂家技术人员现场勘察，然后设计登车桥图纸，才能确定预留的坑位大小。

As there are two forms of fixed hydraulic boarding bridge: customized and not customized, many fixed occasions do not require customization. The size of the conventional boarding bridge is 2440 * 1830mm, and the pit to be reserved is 2600 * 1860 * 510mm, as long as it is reserved according to the manufacturer's standard size. However, some work occasions and environments are different, and it needs to be customized according to the site requirements, At this time, the manufacturer's technicians need to conduct on-site investigation and then design the boarding bridge drawings to determine the size of the reserved pit.

固定式液压登车桥

Fixed hydraulic boarding axle

固定式液压登车桥简单的安装过程！

Simple installation process of fixed hydraulic boarding axle!

一、根据登车桥尺寸，先挖好一个地坑，无地坑是无法安装的；

1、 According to the dimensions of the boarding bridge, a pit shall be excavated first, and it cannot be installed without a pit;

二、把地坑内走线的线路预留好，在地坑尾部的地方；

2、 Reserve the lines for wiring in the pit at the end of the pit;

三、地坑内的三角边都需要用钢来包边，把用于固定的锚钉焊接与角钢的内面，然后上面铺一些沙子，再用混凝土铺设一下；

3、 The triangular edges in the pit shall be wrapped with steel. The anchor nails used for fixing shall be welded to the inner surface of the angle steel, and then some sand shall be paved on it, and then concrete shall be paved;

四、将防撞胶块固定于货台前端登车桥两侧；

4、 Fix the anti-collision rubber block on both sides of the boarding bridge at the front end of the cargo platform;

五、检查下各个部位是否固定牢固，施工完毕。

5、 Check whether the lower parts are firmly fixed and the construction is completed.

以上就是为大家介绍的有关移动登车桥的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.qingfeijixie.cn

The above is a detailed introduction to the mobile boarding bridge. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.qingfeijixie.cn