1.仅当导轨式升降平台的负载无法开始工作时，才应检查液压系统的压力。如果压力低于正常范围，则可以调节溢流阀的容量。

1. Check the pressure of the hydraulic system only when the load of the rail type lifting platform cannot start working. If the pressure is below the normal range, the capacity of the relief valve can be adjusted.

2.液压油变质或有杂质。长期使用导轨提升器的工作油后，工作油中可能会有杂质或变质。将进行采样以检查其是否包含固体颗粒，变色或气味。液压油。

2. The hydraulic oil is deteriorated or has impurities. After long-term use of the working oil of the guide rail lifter, there may be impurities or deterioration in the working oil. A sample will be taken to check whether it contains solid particles, discoloration, or odor. Hydraulic oil.

3.导轨式升降平台的液压管路也是非常紧密的一环。检查液压管路是否畅通。升降机提醒大家检查每个液压阀是否覆盖了单向截止阀，电磁换向阀，比例控制阀和溢流阀，以防止堵塞。如有问题，应尽快清洗或更换液压阀。

The hydraulic pipeline of the rail type lifting platform is also a very tight link. Check whether the hydraulic pipeline is smooth. The elevator reminds everyone to check whether each hydraulic valve is covered with a one-way stop valve, electromagnetic directional valve, proportional control valve, and overflow valve to prevent clogging. If there is a problem, clean or replace the hydraulic valve as soon as possible.

4.检查导轨式升降机的液压系统是否泄漏。着重检查液压管和接头，缸体和液压阀的接头。如果发现液压油泄漏，则更容易混入垫片或搅拌原料皮带。

4. Check the hydraulic system of the guide rail elevator for leaks. Focus on checking the hydraulic pipes and joints, as well as the joints of the cylinder block and the hydraulic valve. If a hydraulic oil leak is found, it is easier to mix the gasket or stir the raw material belt.

5.导轨式升降平台液压泵也是影响液压油流量的关键因素。如果长时间使用液压泵，很容易出现问题。当液压升降平台的速度减慢时，应检查液压泵的供油流量是否稳定。如果发现问题，请尽快与厂家联系以避免保修期。

5. The hydraulic pump of the rail type lifting platform is also a key factor affecting the hydraulic oil flow. If the hydraulic pump is used for a long time, problems can easily occur. When the speed of the hydraulic lifting platform slows down, check whether the oil supply flow of the hydraulic pump is stable. If any problems are found, please contact the manufacturer as soon as possible to avoid the warranty period.

6.不能自行调试溢流阀，主要原因是导轨式升降平台运行缓慢的主要原因是后期人为造成的。因此，重要的是在正常使用时维护和维护演播室，以减少事故的发生提高工作效率。

6. The main reason why the overflow valve cannot be adjusted by oneself is that the slow operation of the guide rail type lifting platform is mainly caused by human factors in the later stage. Therefore, it is important to maintain and maintain the studio during normal use to reduce accidents and improve work efficiency.

感谢您的阅读，此文的文章来源：升降货梯厂家更多的内容和问题请点击：http://www.qingfeijixie.cn我们会继续努力的为您提供服务，感谢您的支持！

Thank you for reading. The source of this article is: Elevator manufacturers. For more information and questions, please click: http://www.qingfeijixie.cn We will continue to work hard to provide you with services, thank you for your support!