The aluminum alloy elevator platform truck must be equipped with professional driver operators who have received special training, passed the examination, and held a certificate to work: According to the actual situation of the work, the above personnel can concurrently serve each other, but the part-time personnel must have a work permit for the part-time job, and be approved by the competent leader, while assuming corresponding responsibilities. After the construction is completed, it is necessary to move the lifting platform on the site, and a professional driver should operate the lift platform truck.

升降平台车作业前，工作负责人应向平台车操作人员，参加工作的全体人员进行技术和交底，内容应包括：工作内容及要求;注意事项及危险点;人员分工情况及责任范围：工作负责人除要对车况和工作人员工作进行检查以外，还要负责查看地形环境起降是否符合技术措施的要求或事先制定的工作方案，如有出入，则应制定出相应的措施后方能开始工作。

Before lifting the platform truck, the person in charge of the work shall conduct technical and safety disclosure to the platform truck operator and all personnel participating in the work, including: work content and requirements; Safety precautions and danger points; Personnel division and scope of responsibility: In addition to checking the vehicle condition and staff work, the person in charge of the work should also be responsible for checking whether the terrain environment takeoff and landing meet the requirements of safety technical measures or the work plan formulated in advance. If there is any discrepancy, corresponding measures should be formulated before starting work.

支腿是铝合金升降机升降平台车操作的一项重要准备工作，应选择平整的地面，如地基松软或起伏不平，必须加道木垫实受力后确定无误，才可进行工作。

The support leg is an important preparatory work for the operation of the aluminum alloy elevator elevating platform car. A flat ground should be selected. If the foundation is soft or uneven, a wooden cushion must be added to firmly bear the force before the work can be carried out.

铝合金升降机升降平台车驾驶员必须按照机械的保养规定，在执行各项检查和保养后方可启动升降平台车，工作前应检查升降平台车的工作范围妨碍升降平台车回转及行走的障碍物。

The driver of the aluminum alloy elevator platform truck must follow the mechanical maintenance regulations and perform various inspections and maintenance before starting the elevator platform truck. Before working, the working range of the elevator platform truck should be checked to remove obstacles that hinder the rotation and walking of the elevator platform truck.

一般说来，液压铝合金升降机升降平台应先起下臂，再起中臂，起上臂。在升降平台车回转操作过程中，必须在下臂起升一定高度后方可进行回转，回转过程应缓慢，注意各臂及平台对各设备的距离是否满足需要。

Generally speaking, the lifting platform of a hydraulic aluminum alloy elevator should first lift the lower arm, then the middle arm, and finally the upper arm. During the slewing operation of the elevating platform truck, the lower arm must be raised to a certain height before it can be rotated. The slewing process should be slow, and attention should be paid to whether the distance between each arm and platform to each equipment meets safety requirements.

铝合金升降机升降平台车上工作人员应佩带带，在带电区域工作时，应将车体按规定进行接地，升降平台车登高作业由工作负责人进行指挥，负责人应按照信号与升降平台车操作人进行联系。发出的信号必须清楚准确。

The personnel on the aluminum alloy elevator lifting platform vehicle should wear safety belts. When working in a live area, the vehicle body should be grounded according to regulations. The lifting platform vehicle climbing operation should be commanded by the person in charge, who should contact the lifting platform vehicle operator according to the signal. The signal must be clear and accurate.

本文由电动液压货梯整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：http://www.qingfeijixie.cn我们会有更多精彩内容等你查看。

This article is organized and released by the electric hydraulic cargo elevator. Do you have any understanding of these contents? For more information, please click: http://www.qingfeijixie.cn We will have more exciting content waiting for you to check.