移动式登车桥装卸货起来是非常好用的一款设备，本身有一定的坡度，起到了桥梁的作用。别看移动式登车桥的体积较大，其实它是相当简单的工具，操作起来也不会那么复杂，一起来看看移动式登车桥要怎么操作？
The mobile boarding bridge is a very useful equipment for loading and unloading. It has a certain slope and functions as a bridge. Although the mobile boarding bridge has a large volume, it is actually a rather simple tool, and its operation is not so complicated. Let's take a look at how to operate the mobile boarding bridge?
一、移动式登车桥每台上面都会配备有一份使用说明书，用户朋友在使用前，要对它进行详细的阅读；
1、 Each mobile boarding bridge will be equipped with a user manual. Users should read it carefully before using it;
二、要特别注意移动式登车桥一定要在平坦坚实的地面上工作；
2、 Pay special attention to that the mobile boarding bridge must work on a flat and solid ground;
三、如果要移动此设备，将接地连接板先收起，调节支撑架及可调节支撑腿要回收离开地面，用叉车或其他设备抬起接地连接板一端前移，在移动轮的作用下可以轻松移动到所需的位置；
3、 If the equipment is to be moved, the grounding connecting plate shall be put away first, the adjusting support frame and adjustable support legs shall be recovered from the ground, and one end of the grounding connecting plate shall be lifted by a forklift or other equipment and moved forward, so that it can be easily moved to the required position under the action of the mobile wheel;
四、在使用前先用摇把调节好调节支撑架，保证登车桥台面与车厢地面在同一水平面内，然后将唇板和车厢吻合成一体；
4、 Before use, adjust the adjustment support frame with a crank to ensure that the platform of the boarding bridge is in the same horizontal plane with the floor of the car, and then integrate the lip and the car;

五、松开每个可调节支撑腿的锁紧螺母，将每个可调支撑腿调到接触地面并稍微受力为止，保证各个可调支撑腿及调节支撑腿均衡受力，不能让调节支撑腿离开地面，然后锁紧各个调节支撑腿的锁紧螺母；
5、 Loosen the lock nuts of each adjustable support leg, adjust each adjustable support leg to contact the ground and bear a slight force, ensure that each adjustable support leg and adjustable support leg bear a balanced force, do not let the adjustable support leg leave the ground, and then lock the lock nuts of each adjustable support leg;
六、将挂钩挂住集装箱或车厢可以挂住的受力之处，保证链条受力。避免登车桥与车厢放生相对移位或滑动；
6、 Hang the hook to the force bearing place where the container or carriage can be hung to ensure that the chain is stressed. Avoid relative displacement or sliding between the boarding bridge and the carriage release;
七、放下尾板连接板保证连接板与地面无高度差，实现无台阶式直接登车桥作业。这时，登车桥准备好，就可以开始作业了。
7、 Put down the connecting plate of the tailboard to ensure that there is no height difference between the connecting plate and the ground, and realize the step free direct boarding bridge operation. At this time, the boarding bridge is ready, and the work can start.
以上就是为大家介绍的有关移动登车桥的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.qingfeijixie.cn
The above is a detailed introduction to the mobile boarding bridge, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.qingfeijixie.cn