I The wear of mechanical equipment is generally divided into three stages. In the operation stage, due to the rough appearance and shape of the punch pair and some small errors in the installation, the smoothness of wear is poor. It is found that the load is too large and the appearance of conflict is seriously worn;

二.正常磨损时的液压升降

2、 Hydraulic lifting under normal wear

三.升降机的机械运动中会出现冲突，当发生冲突时，必然会发生磨损。磨损的三个基本规律是：体积磨损与冲突对的相对滑动间隔成正比；与正常载荷成正比；与承载强度或硬度成反比。根据力学理论和后续试验的结果表明，磨损率与冲突元素的关系较弱，冲突元素的差异为一个数量级，磨损率可分为三个定量级，因此冲突因素的变化可以忽略。

III There will be conflicts in the mechanical movement of the elevator, and when conflicts occur, wear will inevitably occur. The three basic rules of wear are: volume wear is proportional to the relative sliding interval of conflict pairs; It is proportional to the normal load; It is inversely proportional to the bearing strength or hardness. According to the results of mechanical theory and subsequent tests, the relationship between wear rate and conflict elements is weak, the difference between conflict elements is an order of magnitude, and the wear rate can be divided into three quantitative levels, so the change of conflict factors can be ignored.

如果升降机本身的重量更重，设备的质量越好，这个说法就不完全正确，但并不意味着它是不合理的。接下来，升降机生产厂家小编会告诉你升降平台的重量对工作的影响。

If the weight of the lift itself is heavier and the quality of the equipment is better, this statement is not completely correct, but it does not mean that it is unreasonable. Next, the elevator manufacturer will tell you the impact of the weight of the lifting platform on the work.

以上就是为大家介绍的有关升降机厂家的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.qingfeijixie.cn

The above is a detailed introduction to the elevator manufacturers. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.qingfeijixie.cn