The scissor fixed unloading lifting platform and the guide rail unloading lifting platform are collectively referred to as "unloading lifting platform". These two kinds of equipment can be used for the vertical transportation of trucks between floors. They are also what we call economic and practical products that replace elevators.

相同点：同为高楼间货物装卸运输，各楼层均可安装控制按钮。实现多点控制，在功能上都设有防止突然断电紧急下降装置、防止液压油管破裂的保护阀，以及防超载、超重等装置。

The same point: for the cargo loading, unloading and transportation between high-rise buildings, control buttons can be installed on each floor. It realizes multi-point control, and is equipped with safety protection valves to prevent sudden power failure and emergency descent, to prevent hydraulic oil pipe from cracking, and to prevent overload, overweight and other safety devices.

不同点：

difference:

剪叉式固定卸货升降平台剪叉臂采用高轻度矩形管打造而成，通过液压原理，液压泵打油进入油缸，将台面提升。而且在使用范围上不仅局限于楼层运输，还可用于大型物件举升、立体停车场、物流上鞋线以及工程流水线高度差之间货物运输等场所。

The scissor arm of the scissor type fixed unloading lifting platform is made of high and light rectangular tubes. Through the hydraulic principle, the hydraulic pump pumps oil into the oil cylinder to lift the table. Moreover, the scope of use is not only limited to floor transportation, but also can be used in places such as large object lifting, three-dimensional parking lot, logistics shoe line, and cargo transportation between the height differences of engineering assembly lines.

导轨式液压卸货升降平台是由链条、钢丝绳、油缸等组合而成，也是通过液压原理，液压油进入油缸，油缸带动链条将台面升起；总结一句；就是以液压油缸为动力，板式起重链条传动。

The guide rail hydraulic unloading lifting platform is composed of chain, steel wire rope, oil cylinder, etc. through the hydraulic principle, the hydraulic oil enters the oil cylinder, and the oil cylinder drives the chain to raise the table; Sum up a sentence; It is driven by hydraulic cylinder and driven by plate lifting chain.

安装不同，导轨式卸货升降平台可以挖坑固定也可做斜坡固定，而剪叉式固定卸货升降平台需要挖坑固定，挖坑深度不是很深，在上相比，同高度、载重、平台的情况下、剪叉式固定卸货升降平台的要比剪叉式液压卸货升降平台要贵。但在安装上导轨式卸货升降平台要剪叉式固定卸货升降平台要麻烦很多。

The installation is different. The guide rail unloading lifting platform can be fixed by digging a pit or by slope, while the scissor fixed unloading lifting platform needs to be fixed by digging a pit, and the depth of the pit is not very deep. In terms of price, the price of the scissor fixed unloading lifting platform is higher than that of the scissor hydraulic unloading lifting platform under the same height, load and platform. However, it is a lot of trouble to install the rail type unloading lifting platform and the scissor type fixed unloading lifting platform.

以上就是为大家介绍的有关剪叉式液压升降平台的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.qingfeijixie.cn

The above is a detailed introduction about the scissor hydraulic lifting platform. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.qingfeijixie.cn