When using the aluminum alloy elevator, it is inevitable to encounter some unexpected situations, such as the sudden increase in the noise of the aluminum alloy elevator. What are the factors causing the increase in the noise of the aluminum alloy elevator?

1.铝合金式升降机各支臂或支杆衔接的轴套或轴因为长期缺少润滑油致使铝合金式升降机升降时噪音 变大,在这种状况下,可以加注润滑油,假如加润滑油仍不起作用,则要查看各个轴套或轴的磨损状况,假如磨损严峻,则需求替换轴套或轴.

1. the axle sleeve or shaft connected with each support arm or support rod of the aluminum alloy elevator has become noisy during the lifting and lowering of the aluminum alloy elevator due to the long-term lack of lubricating oil. In this case, the lubricating oil can be filled. If the lubricating oil still does not work, the wear condition of each axle sleeve or shaft should be checked. If the wear is severe, the axle sleeve or shaft should be replaced

2.升降高度较高的铝合金式升降机富含导轨时,假如导向轮或侧向轮的轴承损坏,在升降过程中,导向轮与导轨冲突时也会发生尖锐的噪音.呈现这种状况,可以替换磨损严峻的导向轮轴承.

2. when the aluminum alloy elevator with high lifting height is rich in guide rail, if the bearing of the guide wheel or lateral wheel is damaged, sharp noise will also occur when the guide wheel conflicts with the guide rail during lifting In this case, the severely worn guide roller bearing can be replaced

3.铝合金式升降机升降组织上、下台面的滚轮磨损变形严峻或外表滑润度差,致使滚轮在导向槽里移动时发生噪音大或铝合金式升降机晃动.

3. the rollers on the upper and lower tables of the lifting organization of the aluminum alloy elevator are severely worn and deformed or have poor surface smoothness, resulting in loud noise or shaking of the aluminum alloy elevator when the rollers move in the guide groove

呈现这个故障的因素主要有几点:滚轮加工精度不行,外表润滑度差;滚轮没有经过热处理,硬度不行;导向槽外表粗糙,润滑度差,加重了滚轮磨损.

There are several main factors that present this fault: the processing accuracy of the roller is not good, and the surface lubrication is poor; The roller has not been heat treated, so the hardness is not good; The guide groove has rough surface and poor lubrication, which aggravates the wear of the roller

呈现这种状况,应替换合格的滚轮,假如导向槽外表粗糙,也应多导向槽的外表进行处理.

In this case, the qualified roller shall be replaced. If the guide groove surface is rough, the surface of multiple guide grooves shall also be treated

4.也应铝合金式升降机因为长期缺少润滑油运转,滚轮轴承损坏,致使滚轮在移动式发生振荡或较大的噪音.处理办法很简单,替换滚轮轴承即可.

4. it should also be noted that the roller bearing of the aluminum alloy elevator is damaged due to the long-term lack of lubricating oil, resulting in vibration or large noise of the roller in the mobile type The solution is very simple. Replace the roller bearing

以上就是为大家介绍的升降机厂家http://www.qingfeijixie.cn有关的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.

The above is the elevator manufacturer introduced to you http://www.qingfeijixie.cn I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service