如何将家用别墅小型电梯调整到静平衡？

How to adjust the small elevator of household villa to static balance?

开始之前一定要保证家庭别墅的小电梯轿厢没有扭曲。确保不变形的时间是汽车组装时。如果汽车变形，下一次的静平衡就不可能了。因此，当家用别墅小型电梯平衡和滚轮导靴调整开始时，汽车的龙门框架需要是自由的，没有变形。如果失真确实存在，则需要在启动前进行调整。

Before starting, make sure that the small elevator car of the family villa is not distorted. The time to ensure no deformation is when the car is assembled. If the car deforms, the next static balance is impossible. Therefore, when the balance and roller guide shoe adjustment of the small elevator in the home villa begin, the gantry frame of the car needs to be free without deformation. If distortion does exist, it needs to be adjusted before starting.

工作顺序：

Working sequence:

1、家用别墅进行小型控制电梯开到。

1. Small control is carried out in the family villa, and the elevator is driven to the top floor.

2、对准滚动导靴，使导轨定位在导靴座的中，导靴的推力构件定位。

2. Align the rolling guide shoe so that the guide rail is positioned in the of the guide shoe seat, and the thrust member of the guide shoe is positioned.

3、将牵引轮中间钢丝绳的引线一直悬挂在客车头盘上。如果钢丝绳是偶数，就把它挂在相邻两根钢丝绳的中间。如果是单数的，把它挂在中间的钢丝绳的前面或后面，但是你需要保持距离。同时要保证铅锤与车顶绳头板的距离。因为车顶绳头板上的孔一般是两排，所以应该有足够的空间悬挂铅锤。

3. Hang the lead wire of the steel wire rope in the middle of the traction wheel on the head plate of the bus all the time. If the wire rope is even, hang it between two adjacent wire ropes. If it is singular, hang it in front of or behind the middle wire rope, but you need to keep a distance. At the same time, ensure the distance between the plumb and the roof rope head plate. Because the holes on the roof rope head plate are generally two rows, there should be enough space to hang the plumb.

4、接下去就是主要通过讲述自己如何进行移动轿顶绳头板。我们已经不能没有太强调移动轿顶绳头板仅是让轿顶绳头板的中目标对准曳引轮的中。移动绳头板的目的发展不是现在想来实现平衡在某一具体位置的轿箱。如果轿顶绳头板为可移动式，则可使用移动绳头板对准曳引轮。如果轿顶绳头板为固定式且用螺栓固定在横梁上，可拆去原螺栓，螺栓可以暂时无法可用1/2”加垫片来代替3/5”，沿着一个立柱的方向以及移动。

4. The next step is to talk about how to move the rope head plate on the car roof. We can't emphasize too much that moving the car roof rope head plate is only to align the middle target of the car roof rope head plate with the middle target of the traction wheel. The purpose of moving the rope head plate is not to balance the car at a specific position. If the car roof rope head plate is movable, the movable rope head plate can be used to align the traction wheel. If the car roof rope head plate is fixed and fixed on the beam with bolts, the original bolts can be removed, and the bolts can not be used temporarily. 1 / 2 "and gasket can be used to replace 3 / 5" and move along the direction and direction of a column.

注意学生这时在移动绳头板时需要具有十分需要小心，因如螺栓掉出就会直接导致轿箱坠落。这时用4个“C”型夹夹住绳头板和上梁，使得绳头板不会发生前后移动，绳头板可以用撬棒沿着设计立柱工作方向不断移动，记住这些完成后企业需要更换回3/5“的螺栓。这时他们可能需要在横梁上开槽，开槽前需要用科学定位销定好位，然后钻一新孔，不要因为在前后方向研究移动绳头板。

Note that students need to be very careful when moving the rope head plate, because if the bolt falls out, the car will fall directly. At this time, four "C" clamps are used to clamp the rope head plate and the upper beam, so that the rope head plate will not move back and forth. The rope head plate can move continuously along the working direction of the designed column with a crowbar. Remember that after these are completed, the enterprise needs to replace the 3 / 5 "bolts. At this time, they may need to slot on the cross beam. Before slotting, they need to fix the position with a scientific positioning pin, and then drill a new hole. Do not move the rope head plate because of studying in the front and rear direction.

以上就是为大家介绍的有关别墅家用电梯的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

The above is a detailed introduction to the villa household elevator. I hope it will help you If you have any questions, please contact us We will provide you with professional service