剪叉式升降平台是用途广泛的高空作业专用设备，其叉式机械结构，提升升降台后，具有高稳定性，宽敞的工作台和高承载能力，进一步扩大了高空作业范围，适合多人同时作业，那么，下面一起了解下剪叉式升降平台起升后有较高的稳定性!

 

Scissor fork lifting platform is a special equipment for high-altitude operation with a wide range of uses. Its fork mechanical structure has high stability, spacious workbench and high bearing capacity after lifting the lifting platform, which further expands the scope of high-altitude operation and is suitable for multiple people to work at the same time. Then, let's learn that the scissor fork lifting platform has high stability after lifting!

 

一、干扰因素有以下五点。

 

1、 Interference factors include the following five points.

 

(1)风速过大)风速在5级以上时，这是不稳定的主要原因之一，进行高空作业容易使移动式升降台摇晃，容易发生事故。

 

(1) (excessive wind speed) when the wind speed is above level 5, this is one of the main reasons for instability. Working at height is easy to shake the mobile lifting platform and cause accidents.

 

(2)脚未张开)如果脚未按照说明书打开，或未完全打开，则会在升降中产生影响，造成不稳定。

 

(2) The foot is not opened) if the foot is not opened according to the instructions, or is not fully opened, it will have an impact on the lifting and causing instability.

 

(3)电压不稳定)移动式升降平台工作时，升降容易不稳定。

 

(3) Voltage instability) when the mobile lifting platform works, the lifting is easy to be unstable.

 

(4)操作失误)移动式升降平台需要在作业前实施试验机，进行3次以上无负荷运行和负荷运行的连续试验，才能在作业中发生故障，进行操作以免运行不稳定。

 

(4) (operation error) the mobile lifting platform needs to implement the testing machine before operation, and carry out continuous tests of no-load operation and load operation for more than 3 times, so as to avoid operation instability.

 

(5)零部件损坏)移动式升降平台是一个统一的整体，因此需要定期进行移动式升降机的检查工作，及时进行故障诊断。

 

(5) The mobile lifting platform is a unified whole, so it is necessary to check the mobile lift regularly and diagnose the fault in time.

 

二、进行剪叉式升降平台整车设计时，以下几点因素。

 

2、 When designing the whole vehicle of scissor lift platform, the following factors should be considered.

 

1)不考虑移动式升降机的柔软性，剪叉式升降平台的上、下工作臂、腿、轮胎等具有足够的刚性。

 

1) Regardless of the flexibility of the mobile elevator, the upper and lower working arms, legs and tires of the scissor lift platform have sufficient rigidity.

 

2)不会影响升降不稳定，因此可以无视，液压缸的质量变动幅度小。

 

2) It will not affect the unstable lifting, so it can be ignored, and the mass variation range of the hydraulic cylinder is small.

 

3)用4条腿支撑，所有轮胎完全远离地面，移动式升降平台工作时。

 

3) Support with 4 legs, all tires are completely away from the ground, when the mobile lifting platform is working.

 

4)将作业台及其负荷作为一个集中负荷固定在作业臂的末端。

 

4) Concentrate the load at the end of the working arm as a fixed working platform.

 

5)其重在各臂的几何学位置将工作台及其载荷视，上、下工作臂为均质的棒状结构，“移动式升降平台车”升降机的份额现状决定了市场地位。

 

5) It focuses on the geometry of each arm, regards the workbench and its load as a homogeneous rod structure, and the market position is determined by the share of "mobile lifting platform vehicle" elevator.

 

以上介绍的就是剪叉式升降平台起升后有较高的稳定性，在剪叉式升降平台的结构中，叉臂之间通过销连接，叉臂之间的相对运动、按压频繁，在叉式升降平台的使用中会发生磨损。

 

The above introduction is that the scissor lifting platform has high stability after lifting. In the structure of the scissor lifting platform, the fork arms are connected by pins, and the relative movement and pressing between the fork arms are frequent, which will cause wear in the use of the fork lifting platform.

 

以上就是为大家介绍的有关剪叉式液压升降平台的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务

 

The above is a detailed introduction to the scissor hydraulic lifting platform. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service