移动式升降平台液压机的维护保养方法有什么？给大家说一说移动式升降平台液压机的维护保养方法：

What are the maintenance methods of mobile lifting platform hydraulic press? Tell us about the maintenance methods of the hydraulic press of the mobile lifting platform:

移动式升降平台的液压系统是全部机器设备的主动脉，决策着升降平台的正常运行，一旦出现难题不仅危害工作效率高并且存有一定风险；因而液压系统的维护保养要搞好，那么关键有什么流程呢

The hydraulic system of the mobile lifting platform is the aorta of all machinery and equipment, which determines the normal operation of the lifting platform. Once there is a problem, it not only endangers the high work efficiency, but also has a certain risk; Therefore, the maintenance of the hydraulic system should be done well, so what is the key process

一、维持液压系统清洁

1、 Keep the hydraulic system clean

移动式升降平台中的液压机油是液压系统的性命。液压系统中有很多高精偶件，有的有减振小圆孔.有的有间隙等；若固态杂质侵入将导致高精偶件挫伤、开卡、油道阻塞等，严重危害液压系统的运作。一般固态杂质侵入液压系统的方式有：加油和检修，维护保养不小心；液压件起屑等。

The hydraulic oil in the mobile lifting platform is the life of the hydraulic system. There are many high precision coupling parts in the hydraulic system, and some have small round holes for vibration reduction Some have gaps, etc; If solid impurities invade, it will lead to contusion, card opening, oil passage blockage, etc. of high-precision coupling parts, which will seriously endanger the operation of hydraulic system. The general ways of solid impurities invading the hydraulic system are: refueling and overhaul, careless maintenance; Scraping of hydraulic parts, etc.

能够从下列好多个层面避免固态杂质侵入系统软件：

It can prevent solid impurities from invading the system software from the following aspects:

①加油时

① When refueling

齿轮油务必过虑充注，加油专用工具应经常清洁。不可以以便提升加油速率而除掉汽车油箱加油出口处的过滤装置。加油工作人员应用整洁的胶手套和工作服装，防止固态杂质和化学纤维杂质跌入油中。

The gear oil must be overfilled, and the special tools for refueling should be cleaned frequently. It is not allowed to remove the filtering device at the refueling outlet of the automobile fuel tank in order to improve the refueling rate. Refueling personnel shall use clean rubber gloves and work clothes to prevent solid impurities and chemical fiber impurities from falling into the oil.

②维护保养时

② During maintenance

移动式升降平台的拆装液压油滤芯加油盖、滤芯盖、监测孔、高压油管等位置，导致系统软件油道曝露时要绕开工地扬尘，拆装位置要先完全清洁后才可以开启。如拆装液压油滤芯加油盖时；先去除油盖四周的土壤，拧下来油盖后，解决残余在结合部位的脏物（不可以自来水清洗以防水渗到汽车油箱），确定清洁完毕后才可以开启油盖。如需应用擦洗原材料和锤子时，应挑选不出化学纤维杂质的擦洗原材料和敲击面粘附硫化橡胶的专用型锤子。

When the hydraulic oil filter element filler cap, filter element cap, monitoring hole, high-pressure oil pipe and other positions of the mobile lifting platform are disassembled, the system software oil duct shall be exposed to avoid the dust on the construction site. The disassembly position shall be completely cleaned before it can be opened. For example, when disassembling the filler cap of hydraulic oil filter element; First remove the soil around the oil cover, screw off the oil cover, and then solve the residual dirt at the joint part (do not wash with tap water to prevent water from seeping into the automobile fuel tank). After cleaning, open the oil cover. If it is necessary to use scrubbing raw materials and hammers, the scrubbing raw materials without chemical fiber impurities and the special hammer with vulcanized rubber adhered to the striking surface shall be selected.

液压件、高压胶管要用心清洗，用髙压风轻轻吹干后拼装。大伙儿要采用包装完好无损的真品过滤芯，换机油时另外清洗滤芯，安装过滤芯前运用擦洗原材料用心清洁滤芯壳内底端废弃物。

Hydraulic parts and high-pressure rubber hoses shall be carefully cleaned and assembled after being gently dried with high-pressure air. Everyone should use the genuine filter element with intact packaging. When changing the engine oil, clean the filter element additionally. Before installing the filter element, use scrubbing raw materials to carefully clean the waste at the bottom of the filter element shell.

二、搞好液压系统的清洗工作

2、 Do a good job in cleaning the hydraulic system

清洗油务必应用与系统软件常用型号同样的齿轮油，油温度在45～80℃中间，用大总流量尽量将系统软件中杂质带去。液压系统要不断清洗三次左右，每一次清洗完后，趁油热时将其所有释放系统软件。清洗结束再清洗滤芯、拆换过滤芯后充注新油。

The cleaning oil must be the same gear oil as the common model of the system software. The oil temperature is between 45 ~ 80 ℃. Use a large total flow to remove the impurities in the system software as much as possible. The hydraulic system shall be continuously cleaned for about three times. After each cleaning, release all the system software while the oil is hot. After cleaning, clean the filter element, remove and replace the filter element, and then fill with new oil.

移动式升降平台液压机系统软件要搞好维护保养工作，不能麻痹大意；由于立即危害到工作效能和升降平台的使用期，请大家要铭记！

The system software of the hydraulic press of the mobile lifting platform shall be well maintained, and shall not be careless; As it immediately endangers the work efficiency and the service life of the lifting platform, please remember!

以上就是为大家介绍的有关电动液压货梯的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.

The above is a detailed introduction to the electro-hydraulic cargo elevator. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service